Mode Field; Symbol/Code/Format Field - Motorola DSR-6050 Operator's Manual

This menu, together with the Manual Tune menu, allows the user to initially
acquire a DigiCipher II signal. Press the56buttons until the Modulation menu
appears. Press the ENTER button to continue.
When either of the DCII-MAN, DVB-MAN, 8PSK-TC, or 8PSK-DVBS2 options
in the Mode field are selected, the user must additionally specify a Symbol/Code/
Format combination.

Mode Field

Press the4button until the cursor is at the Mode label, and press the ENTER button
to move into the field. Press the56buttons to display the options: DCII-AUTO,
DCII-MAN, DVB-MAN, 8PSK-TC, and 8PSK-DVBS2. Select a mode and press
ENTER to exit the field.
Note: In DCII-MAN or DVB-MAN (both manual) modes or 8PSK-TC or 8PSK-DVBS2,
the DSR-6050 only searches for what is displayed in the Symbol/Code/Format field. If
DCII-AUTO is selected, the DSR-6050 searches through all available combinations to
acquire a signal, and then remains parked on a signal once it is acquired.

Symbol/Code/Format Field

Press the4button until the cursor is at the Symbol label and press the ENTER button
to move into the field. Press the56buttons to display the options. For DCII Manual,
use the56buttons to scroll through the Symbol/Code/Format combinations. Select
the combination provided by your programmer and press ENTER to return to top
menu. This field is not available when the DCII-Auto option in the Mode field is
DSR-6050
Operating the DSR-6050
17