Chapter 4 Troubleshooting - Motorola DSR-6050 Operator's Manual

Before contacting the Hotline, review Table 4-1 for problems and suggested solutions.
Table 4-1: Troubleshooting Solutions
Problem
LCD blank, no LEDs lit.
LEDs illuminate, but LCD is
blank or too dark to read.
No picture, no level
indication.
Poor audio quality or low
audio level.
No video or Bypass Video
is present.
No audio or Bypass Audio
is present.
Will not acquire.
Incorrect language.
DSR-6050
Possible Cause
No power to unit.
LCD contrast out of
adjustment.
No LNB signal port.
Audio levels
incorrect.
Unit is in bypass
mode.
Unit is in bypass
mode.
Port not configured.
Wrong language
setting.
Troubleshooting
Solution
Plug in the unit
Adjust LCD contrast
Connect LNB coax
Adjust audio levels
Change to an available
channel.
Change to an available
channel.
Check port configuration and
manual frequency tune
Check language screen
settings
4
Reference
See IRD menu, Contrast
field
See "Connecting the
DSR-6050" on page 3.
53