Motorola DSR-6050 Operator's Manual page 8

1
• Operational modes include: DC-II MAN, DVB-MAN, DCII-AUTO, 8PSK-TC and
8PSK-DVBS2. Detailed modulator settings options will vary depending on the unit's
operational mode setting.
• MPEG-2 video and Dolby
decode/decompression and audio compression respectively.
• Asynchronous Serial Interface (ASI) and Gig-E output for digital transport stream output.
Both can be configured to display consistent PID mapping, regardless of service input.
• ASI input.
• Ethernet Port for SNMP control and/or IP data pass through.
• DTMF output and relay control of tape machines and other ad insertion equipment.
• Four Form-C relays used for fault alarm indication or uplink control.
• Memory to recall the operating configuration when power sags or is removed.
• Security features include Motorola DigiCipher II security technology. The DSR-6050 does
not require a TVPass
broken, security can be renewed by inserting a card with a new code into the transcoder.
Programmers may also utilize fingerprinting techniques to aid in piracy control.
• A two line, 40-character front panel with a Liquid Crystal Display (LCD).
• The DigiCipher II system allows for retune events in which a programmer sends
over-the-satellite messages to specified transcoders to change the service they output
for a specified time period, then return to a specified service. During a retune event, the
user is locked out from editing this menu to ensure that the transcoder does not get lost.
• Asynchronous data output will be supported in the future phase.
2
®
Digital/MPEG-2 Layer I audio are employed for video
®
card to operate with security. In the unlikely event that the code is