Input Field; Mode Field - Motorola DSR-6050 Operator's Manual

Input Field

The Input field displays the input to which the transcoder is currently tuned. It
allows manual selection of Port 1 through Port 8 or the ASI input so that the DSR-
6050 can acquire the DigiCipher II system signal and automatically download
network data required for operation. To select the input:
Press the4button until the cursor is at the Input label and press the ENTER button.
Press the56buttons to scroll to the input that is connected. Unless changed, the
DSR-6050 displays values for Port 1. Press ENTER to confirm the selection and
return to the top line of the menu. If Port 1 through Port 8 is selected, then move to
the Mode field, Xpnr field, or Lfreq field. These fields are not visible when ASI In
is selected.
The following screen prompts the user to confirm the selection.
If you press any arrow button (3456) at this point, the Caution screen
disappears and the ManualTune menu reappears without any changes. But, to make
a selection, press the ENTER button to set the port selection.

Mode Field

The Mode field allows selection of the frequency plan type for the satellite signal to
which the DSR-6050 is tuned. If the application is a North American C-band
satellite center frequency, select the transponder number in the Xpnr field.
Otherwise, use the L Freq option and the LFreq field. The L Freq option can be
used for all current satellite LNB signals, including C-band and Ku-band.
Press the4button until the cursor is on the Mode label. Then press the ENTER
button to move into the field. There are two choices: Xpndr and L Freq. Press
the56buttons to display the choice. Then press the ENTER button to confirm the
selection.
If Xpndr is selected, choose a transponder in the Xpnr field. The frequency in the
LFreq field is set automatically based on internal transponder tables.
If L Freq is selected, the Xpnr field no longer appears because the transponder/
frequency relationship is not known. Select a transponder frequency between 950
and 2150 MHz in the LFreq field. At this point, you cannot select a transponder in
the Xpnr field. The default setting is Xpndr. This field is not available when the
ASI In option in the Input field is selected.
DSR-6050
Operating the DSR-6050
15