General Specifications - Advantech TREK-688 User Manual

1.2

General Specifications

Features
ƒ
Intel® Haswell Core™ i7 Dual core high performance processor for multitasking.
ƒ
Embedded video encoder supports up to 12 analog video inputs for D1, 30fps resolution and 8 audio inputs
ƒ
Dual external HDD/SSD tray with key lock protection.
ƒ
Easily paired with TREK in vehicle smart displays via a single cable connection.
ƒ
Intelligent vehicle power management system for ignition on/off/delay and power protection functions.
ƒ
Vehicle diagnostic interface with configurable dual CAN(J1939,OBD II/ISO 15765) and J1708 protocols.
ƒ
Built in LTE/GNSS/WLAN/BT (with dual SIM cards) modules.
ƒ
Advanced Shock & anti vibration certified by MIL STD 810G, EN60721 3(5M3)
ƒ
Rich management & video SDK , test utility for customer evaluating.
Specifications
Processor
Memory
Core
Graphic
Video HW Encoder
O.S
CFast
mSATA
Storage
HDD/SSD
Smart Display Port
Display
HDMI
VGA
Vehicle I/O Port
I/O
Generic I/O Port
Standard I/O Port
Video / Audio input
TREK-688 User Manual
Intel® Core™ i7 4650U Dual Core, 2.9GHz (i3 4010U & i5 4300U by
project support)
1 x SO DIMM socket
Up to 8GB DDR3L 1600 Non ECC memory module; (Default
configuration: 4GB)
Intel HD graphics 4400 1.1GHz
Stretch S7, support H.264, MJPEG format; Resolution up to D1, 30fps
per channel
Windows 7 pro 32bit as default. WES7, WE8S 32bit by project support
Linux Fedora 18 Remix (kernel 3.8.0) (32 bit) by project support
1 x external accessible CFast slot with cover, support system boot up
Default configuration: 16GB, SLC SQFlash CFast card
1 x mSATA slot, support system boot up
Default configuration: N/A; BOM optional, by project based
2 x external accessible 2.5" Mobile HDD/SSD tray with key lock
protection, support system boot up (Optional)
Support SATA Gen2 (3Gb/s)
12V/2A power output for TREK 30x
1 x 18 bits LVDS (Resolution : 800x480 (TREK 303), 1024 x768 (TREK
306); default TREK 306)
1 x Line Out (*2) (For Speakers on TREK 30x)
2 x UART (TX/RX, TX/RX/RTS) (For T/S, Hot keys, brightness, light
(*1)
sensor control)
1 x USB 2.0 Type A
1 x PWR Button Signal
1 x Reset Button Signal
1 x HDMI 1.3b (Resolution up to 1920 x 1080)
1 x DB15 (Resolution up to 2560 x 1600)
2 x CAN Bus (Support Raw CAN, J1939, OBD II/ISO 15765; FW
configurable)
1 x J1708 (Support J1587)
1 x 4 wire RS 232/422/485 (Default RS 485, by software setting)
2 x 4 wire RS 232
4 x Isolated DI (Dry Contact)
4 x Isolated DO (Open collector output, driving by relay)
1 x Line Out (*2)
1 x Mic In
1 x USB 2.0 Type A (Front side)
2 x USB 3.0 Type A (Rear side, with cable clip)
1 x High Speed Full RS 232, DB 9 (Pin 9 = Ring, 12V/5V @ 0.5A is BOM
optional by jumper setting)
2 x Giga LAN, with 8 pin M12 connector
16 ch Video inputs, Video Compression: support H.264, MJPEG
4