Introduction; Specifications; General Specifications; Functional Specifications - Advantech MIO-6300 User Manual

1.1

Introduction

MIO-6300 is a MIO 3.5" board with embedded Intel® Celeron® N2930 1.83 GHZ pro-
cessor targeted at Robotics applications. MIO-6300 can support DDR3L memory up
to 8 GB and has 24 bit LVDS/VGA, with 3 LAN/1 USB 3.0/ 3 USB2.0/ 2 RS-232/422/
485 /2 full size miniPCIe/12 and 24V power input/ CANBus Support.
1.2

Specifications

1.2.1

General Specifications

 CPU: Intel® & Celeron® N2930
 BIOS: AMI EFI 64 Mbit Flash BIOS
 System Memory: DDR3L, 1333 MHz for N2930, up to 8 GB
 Internal I/O Interface: 1 x LVDS and 1 x SATA
 Battery: Lithium 3 V / 210 mAH
1.2.2

Functional Specifications

Processor
Memory
Graphic Engine
Display
Audio
PCI-Express Interface
SATA Interface
USB Interface
Power Management
BIOS
MIO-6300 User Manual
 Celeron® N2930 SoC
 Frequency
– N2930 1.83 GHz/ CPU Burst 2.16GHz
 Manufacturing Technology: 22 nm
L2 cache: 2 MB (N2930)

 Supports DDR3L, 1333 MHz (N2930), up to 8 GB
 SODIMM Socket: 204-pin SODIMM socket type *1
 Directx* 11, OGL 3.0, OCL 1.1, OGL ES 2.0
 Hardware decode/ acceleration:
– Encode: H264, MPEG2
– Decode: H264, MPEG2, VC-1, WMV9
LVDS (on board): 18/24 bit, 1440 x 900 at 60 Hz

 VGA: 2560 x 1600 at 60 Hz
 Dual independent display: LVDS+VGA
 High Definition Audio (HD) ALC-888S codec
 Up to 2 channel of PCM (Pulse Code Modulation) audio out-
put
Support Line-out, Line-in

Lane 1 & 2: MIOe connector

 Lane 3: Full-size Mini PCIe connector
 Lane 4: Intel i210 GbE controller
 SATAII: 1 x mSATA by mini-PCIe Socket
 SATAII: 1x SATA (Max. Data transfer rate 300 MB/s)
 1 x USB 2.0 & 1 x USB 3.0 port
 2 x USB 2.0 by box wafer connector by MIOe connector
 Transmission speed up to 480 Mbps (USB 2.0) / 5 Gbps
(USB 3.0)
 Full ACPI (Advanced Configuration and Power Interface) 3.0
 Supports S0, S3, S4, S5
 Support wake on LAN
AMI EFI 64 Mbit Flash BIOS via SPI
2