Name And Description Of Each Display Contents On General Operation Mode - SunStar SPS/A-3020 5030 SERIES User Manual

2) Name and Description of Each Display Contents on General Operation Mode

It is an initial screen when power is on for the first time, but display of screen can be changed according
to the general sewing related parameter.
A."POWER LED": When you turn on the power, this lamp also comes to light on.
B."READY LED": This lamp comes to light on when a machine is ready to work by reading patterns.
C."ERROR LED": When errors including sensing thread and emergency stop happen this lamp comes
D. " NO": It indicates pattern No. Press NO key and input the pattern number you want by pressing
digit keys. (000 ∼ 999)
E."XS": It indicates a rate of enlargement and reduction for width. You can change the value at your
option by using digit keys after pressing down X SCALE key. (001[%] ∼400[%])
F."YS": It indicates a rate of enlargement and reduction for length. You can change the value at your
option by using digit keys after pressing down Y SCALE key. (001[%] ∼400[%])
G."SP": It indicates sewing speed. You can change the speed you want by pressing down SPEED key.
(200[SPM] ∼2500[SPM])
H. " BC": It indicates setting value of bottom thread exchange counter. You can change the value at
your option by using digit key after pressing down B. SET key. (000 ∼ 999)
I. "PC" : It indicates setting value of working capacity. You can change the value at your option by
using digit keys after pressing down P. SET key. (0000 ∼9999)
J. "NOR_SEW": It shows working condition. General sewing and chain sewing are available.
" NOR_SEW"indicates the general sewing and "CHN_XX"means chain sewing.
28
N O : 0 0 0
POWER LED
X S :1 0 0 %
READY LED
Y S :1 0 0 %
ERROR LED
B C :0 0 0
During reading or writing the patterns, the lamp flickers. If you press ENTER, you
can get out of the "READY"state.
to light on.
※ Reference : 00~15 are available in XX of "CHN_XX"
N O R _ S E W
S P : 1 5 0 0
P C : 0 0 0 0