How To Use Pallet - SunStar SPS/A-3020 5030 SERIES User Manual

13) How to Use Pallet

This device is divided into 2 types according to clamping method of sewing material.
Generally it is divided into Upper/Lower Clamp Device (See Figure 26) and Pallet Clamp Device (see Figure
28) for cassette work and unless particular order is made at the moment of purchase, Upper/Lower Clamp
Device is attached and shipped out. This chapter describes how to remove Upper/Lower Clamp Device and
how to attach Pallet in case of using pallet being provided in the accessory box.
A. Removal of Upper Clamp Device
a) First, turn off the power and cut off influx of
air by turning the finger valve (See Figure 6
on page 14) to counter clockwise direction.
b) Disassemble the hose connected to the left
and right upper clamp cylinder as shown in
the figure.
[ Caution ]
After disassembly, fix the remained straight
union (①, ②) and hose part not to enter into
driving part in case of X-Y transfer.
c) Unscrew 3 fixing screw③ of Upper Clamp
Device attached to left/right of X-transfer
frame.
[ Caution ]
In case of screw disassembly, if the screw and
washer enter into x-driving part, a material
trouble can occur in operation of the machine.
Please pay attention in disassembling.
d) Separate upper clamp device from X-transfer
frame.
22
①
②
[ Fig. 24 ]
③
[ Fig. 25 ]
[ Fig. 26 ]