Operation; Navigating In The Menu Tree - Siemens FDUL221 Technical Manual

6

Operation

Navigating in the menu tree

6 Operation
6.1 Navigating in the menu tree
40
Building Technologies
Fire Safety
There are two menu trees.
The 'Topology' menu tree shows all information on the connected detector line.
The 'Configuration' menu tree shows all information and settings on the
FDUL221 line tester.
'EL' operation mode has its own menu trees [
'Topology' menu tree
The detector line is connected [
1. Switch on the FDUL221 line tester.
The software version is briefly shown on the display.
2. Use the buttons to navigate.
3. Select the following to read in the line topology:
- For a loop or a sub-stub on a loop, select 'Startup Loop A->B'.
- For a stub or a single line device, select 'Startup Stub A'.
4. Exit the 'Topology' menu tree by switching the FDUL221 line tester off.
43].
47].
008250_i_en_--
2013-08-15