Functions In The 'Configuration' Menu; Pc Operation - Siemens FDUL221 Technical Manual

5.4.5
5.4.6
Building Technologies
Fire Safety

Functions in the 'Configuration' menu

The following menus and functions
1
configuration mode:
Setting the LCD display
– Contrast
– Light mode
Selftest
– Display
– LEDs
– Power supply
– Internal hardware
– Line driver
– Cable/fuse A+
– Cable/fuse A-
– Cable/fuse B+
– Cable/fuse B-
Mode: FDnet
– Identification
Load Factory Def. (default settings)
Save & Exit
End
Depending on the operation mode, not all menus and functions are available.
1
See also
Navigating in the menu tree [

PC operation

The FDUL221 line tester can communicate with a PC via cable for the following
tasks:
Firmware update for the FDUL221 line tester
Transferring data from the FDUL221 line tester to a PC
See also
Operating the line tester with a PC [
Structure and function
are available in the FDUL221 line tester's
1
40]
5
Function
56]
39
008250_i_en_--
2013-08-15