Table of Contents
Advertisement
1 About this document
Target group
Project Manager
Project engineer
Installation personnel
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document contains all necessary information on the FDUL221 line tester with
firmware version V4.x or higher.
Three variants of the FDUL221 line tester are described.
Variant 1 (RS232) applies to FDUL221 with an RS232 serial interface
Variant 2 (MC link) applies to FDUL221 with an MC link serial interface
Variant 3 (USB interface) applies to FDUL221 with an integrated USB interface
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Target groups
The information in this document is intended for the following target groups:
Activity
Coordinates the deployment of all
persons and resources involved in
the project according to schedule.
Provides the information required to
run the project.
Sets parameters for product
depending on specific national
and/or customer requirements.
Checks operability and approves the
product for commissioning at the
place of installation.
Is responsible for troubleshooting.
Assembles and installs the product
components at the place of
installation.
Carries out a performance check
following installation.
Configure the product at the place of
installation according to customer-
specific requirements.
Check the product operability and
release the product for use by the
operator.
Searches for and corrects
malfunctions.
Carries out all maintenance work.
Checks that the products are in
perfect working order.
Searches for and corrects
malfunctions.
About this document
Technical terms
Qualification
Has obtained suitable specialist training for
the function and for the products.
Has attended the training courses for
Project Managers.
Has obtained suitable specialist training for
the function and for the products.
Has attended the training courses for
Product Engineer.
Has received specialist training in the area
of building installation technology or
electrical installations.
Has obtained suitable specialist training for
the function and for the products.
Has attended the training courses for
commissioning personnel.
Has obtained suitable specialist training for
the function and for the products.
1
5
008250_i_en_--
2013-08-15
Hide quick links:
Advertisement
Table of Contents
