Transferring A Saved Line Topology To A Pc - Siemens FDUL221 Technical Manual

Line tester
Hide thumbs Also See for FDUL221:
Table of Contents

Advertisement

6.12
Building Technologies
Fire Safety
3. Connect the FDUL221 line tester to the power supply and switch it on.
-
Ensure that the power supply and the USB connection are not interrupted
during an upload or download.
4. Start the 'PC Linetester Tool FXS2017' software on the PC.
5. In the 'Read in' menu, select the 'Start reading in' sub menu.
The line tester can be operated from the PC using the 'PC Linetester Tool
FXS2017' software.
You can delete all the files on the FDUL221 line tester with the 'PC Linetester
Tool FXS2017' software.
The USB connection can be affected in areas where there is a high level of EMC
interference. In such cases, use the FDUL221 line tester without the 'PC
Linetester Tool FXS2017' software.
If you have any questions, please contact the Customer Support Center
Customer Support Center/PSP Product Support Platform CSC
1)
address: https://intranet.sbt.siemens.com/fs/CSC/
See also
Overview [

Transferring a saved line topology to a PC

The FDUL221 line tester is in 'EL' operation mode.
The 'PC Linetester Tool FXS2017' software is installed on the PC.
The PC is connected to the FDUL221 line tester by cable.
1. Start the 'PC Linetester Tool FXS2017' software.
2. Select 'FDUL221'.
3. Wait until the data has loaded.
4. Select the 'FDUL221-EL' menu and the 'Upload saved topology' sub menu.
5. Select the storage location.
6. Define the file name.
7. Save the file with 'Save Topology'.
The file is saved.
You can delete all the files on the FDUL221 line tester with the 'PC Linetester
Tool FXS2017' software.
Transferring a saved line topology to a PC
20]
Operation
6
.
1
57
008250_i_en_--
2013-08-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents