Siemens FDUL221 Technical Manual page 42

6 Operation
Navigating in the menu tree
42
Building Technologies
Fire Safety
'Configuration' menu tree
1. To navigate in the 'Configuration' menu tree, press the
the FDUL221 line tester on at the same time.
The display shows 'LineTester Config'.
2. Use the buttons to navigate.
3. Exit the 'Configuration' menu tree via 'Save & Exit' or 'Exit'.
LineTester Config
LCD setup
Contrast
Light mode
Selftest
Display
LEDs
Supply
Internal HW
Linedriver
Cablin/Fuse A(+)
Cablin/Fuse A(-)
Cablin/Fuse B(+)
Cablin/Fuse B(-)
Mode: FDnet
Load Factory Def
Save & Exit
Exit
Menu tree for 'Configuration' for standard operation mode
ON
OFF
Auto
Test Supply
Vbat = .....mV
VL = .....mV
Test Hardware
UP key: cable test
with loopback plug.
SIGMA
Spy
32V
button and switch
008250_i_en_--
2013-08-15