Opening A Saved Line Topology; Operating The Line Tester With A Pc - Siemens FDUL221 Technical Manual

6 Operation

Opening a saved line topology

6.10
6.11
56
Building Technologies
Fire Safety
Opening a saved line topology
In 'EL' operation mode, saved line topologies can be opened using the 'PC
Linetester Tool FXS2017' software.

Operating the line tester with a PC

The FDUL221 line tester can be controlled via a connected PC. The 'PC Linetester
Tool FXS2017' software is supplied with the FDUL221 line tester on CD or can be
downloaded from the Customer Support Center
Depending on the variant of the FDUL221 line tester, there are various options for
connecting the line tester to the PC:
Variant 3: Direct connection to USB interface
Variant 2: Connection via FDUZ221/FDUZ227
Variant 1: Connection via RS232 interface
To commission, proceed as follows:
The PC and the 'PC Linetester Tool FXS2017' software are available.
The components for linking the FDUL221 and PC are present.
1. Install the 'PC Linetester Tool FXS2017' software on the PC.
2. Connect the FDUL221 line tester to the PC.
- For variant 3, use a USB cable.
- For variant 2 use the FDUZ221 MCL-USB adapter or the MCL-USB
adapter (radio) FDUZ227. Use the supplied cable (MC link and USB) for
the connection.
- For variant 1, use the RS232 PC cable. The RS232 connection is in the
battery compartment.
.
1
008250_i_en_--
2013-08-15