Operation; Switching On And Off; Navigating In The Menu - Siemens FDUD293 Technical Manual

5

Operation

Switching on and off

5 Operation
5.1 Switching on and off

5.2 Navigating in the menu

24
Building Technologies
Fire Safety
Switching on the service device
1. Briefly press the on/off button above the display.
The following is shown on the display: Device manufacturer, device type,
firmware version.
2. Press any button on the keypad.
The main menu is shown on the display.
The service device is switched on and ready for operation.
Switching off the service device
1. Press and hold the on/off button above the display for two to three seconds.
The power symbol and 'OFF' are shown on the display.
2. Release the on/off button.
The service device is switched off.
If the service device does not perform an action for approx. 20 minutes, it is
automatically switched off.
There are two ways of navigating to a particular menu item:
Directly entering the menu level using the numerical buttons on the keypad
Using the navigation buttons on the keypad
Navigating with the numerical buttons
Enter the desired menu level using the numerical buttons on the keypad.
You are taken straight to the corresponding menu item or the command is
directly executed.
Example: If you would like to select menu item '4.4 Setup' in the '1 Language:'
menu, press buttons <4> and <1> on the keypad one after the other.
You will find an overview of all menu items with the corresponding menu levels in
the 'Menu overview' chapter.
009718_e_en_--
2014-04-11