Illustra Flex 3MP Indoor and Outdoor Dome Cameras Quick Start Guide
Interior button
Connectors and field wiring terminals for external Class 2 circuits provided with marking indicating
NOTE
minimum Class of wiring to be used. Class 2 shall be marked adjacent to the field wiring terminals.
8200-1456-02 E0
Table 7 Interior button descriptions
Resets to factory default by pressing and holding the button for five seconds.
Reboots the unit.
Analog out port.
Power over Ethernet (PoE) port.
Figure 8 Connectors of the camera
Figure 9 Audio and alarm pin definitions
Description
4