Managing Cameras With The Illustra Connect Tool - Illustra Flex Quick Start Manual

3mp indoor and outdoor dome cameras

Table of Contents

Enter the IPv4 Address in the IPv4 Address text box in the form xxx.xxx.xxx.xxx.The

default setting is '192.168.1.168'

Enter the Network Mask in the Network Mask text box xxx.xxx.xxx.xxx. The default

setting is '255.255.255.0'

Enter the Gateway IP address in Gateway text box xxx.xxx.xxx.xxx.

Enter the Primary DNS Server in the Primary DNS Server text box xxx.xxx.xxx.xxx.

Select Apply to save the settings.

Managing cameras with the Illustra Connect tool

In addition to using the IE browser to access your camera, you can alternatively use the provided

tool, Illustra Connect.

Illustra Connect is a management tool designed to manage your network cameras on the LAN. It can:

• help you find multiple network cameras

• set the IP addresses

• show connection status

• manage firmware upgrades

• bulk configuration

Procedure 16 Connecting to the camera using Illustra Connect

Note:

Illustra Connect can only discover devices on the same subnet as its host computer. Therefore, the

camera and the computer being used to configure it must be on the same subnet.

Step Action

Using a computer which is connected to the same network and subnet, install the Illustra

Connect software.

The Illustra Connect software and the Illustra Connect manual are available to download on

www.illustracameras.com

When the installation is complete, run Illustra Connect.

It searches the network and displays all compliant devices.

Select the camera you want to configure, locating it by its unique MAC address.

Right-click the camera and select Launch Web GUI Configuration. The camera Web User

Interface displays.

Illustra Flex 3MP Indoor and Outdoor Dome Cameras Quick Start Guide

- End -

8200-1456-02 E0

Table of Contents