Table of Contents
Advertisement
Illustra Flex 3MP Indoor and Outdoor Dome Cameras Quick Start Guide
Interior button
Note:The connector cable of the Outdoor Dome Camera should be contained in a conduit suitable for
outdoor use.
Connectors and field wiring terminals for external Class 2 circuits provided with marking indicating
NOTE
minimum Class of wiring to be used. Class 2 shall be marked adjacent to the field wiring terminals.
8200-1456-02 E0
Table 18 Interior button descriptions
Resets to factory default by pressing and holding the button for five seconds.
Reboots the unit.
Analog out port.
Power over Ethernet (PoE) port.
Figure 19 Connectors of the unit
Figure 20 Audio and alarm pin definitions
Description
12
Advertisement
Table of Contents
