System Requirements - Illustra Flex Quick Start Manual

The below table lists the minimum requirements to implement and operate Illustra Flex 3MP Indoor
and Outdoor Dome cameras.
System hardware
CPU
RAM
Display
System software
Browser
Unit
Power Supply
Networking
Wired
NOTE All the installation and operations should comply with your local electricity safety rules.
To avoid damage to the unit, never connect more than one type of power supply (PoE IEEE802.3
CAUTION Ethernet Class 0 or AC24V power plug) at the same time. If using PoE, this camera is to be
connecting only to PoE networks without routing to heterogeneous devices.
18
Illustra Flex 3MP Indoor and Outdoor Dome Cameras Quick Start Guide

System Requirements

Table 25 System Requirements
Intel Pentium 4 2.4GHz or equivalent
1 GB or above
NVIDIA GeForce 6 Series or ATI Mobility Radeon 9500
Microsoft Internet Explorer 9 or above, Firefox, Safari, Chrome
AC 24V / PoE
10/100BASE-T Ethernet (RJ-45 connector)
NOTE: A switch is required for surveillance on multiple units.
8200-1456-02 E0