Remove The Security Bezel; Remove The Pdb Cover - HP Apollo 2000 Maintenance And Service Manual

Place the chassis on a flat surface.
10.

Remove the security bezel

To access the front panel components, unlock and then remove the security bezel.

Remove the PDB cover

Power down the system (on page 27).
1.
Disconnect all peripheral cables from the nodes and chassis.
2.
Remove all nodes from the chassis
3.
If installed, remove the security bezel (on page 31).
4.
Remove all drives
5.
If installed, remove the RCM module (on page 29).
6.
Remove all power supplies
7.
Remove the chassis from the rack (on page 30).
8.
Remove the access panel
9.
("Remove the node from the
("Hot-plug drive" on page 58).
("Remove the power
("Remove the chassis access
chassis" on page 27).
supply" on page 28).
panel" on page 32).
Removal and replacement procedures 31