Load From Archive - Raytech TR-MARK III Instruction Manual

8.2.2 Load from Archive

You may already have the transformer you are up to measure stored on TR-MARK III or on a
memory stick.
In the Archive screen, make your choice by touching on a transformer with your finger. Tap
'Load' to load it and append your measurement. Tap 'Clone' to create a new transformer,
based on the one you have chosen.
Touch the pictures on top (MARK III or memory stick) to choose between the sources. The
memory stick will only be displayed if connected.
90100.1.02 Instruction Manual TR-MARK III
Touch here to
choose source
Page 36 of 70