Raytech TR-MARK III Instruction Manual page 24

8.1.2.3 Turns Ratio or Voltage Ratio, Print and Save
Of course TR-MARK III provides conversion of voltage ratio in to turn ratio. You can easily
switch between these two options
After every measurement the results can be printed or stored. Use 'Print' and 'Save' to do
so.
NOTE
⇒ 'Save' has only once an effect. To save several measurements, see
Turns Ratio and Voltage Ratio:
Tip here
NOTE
⇒ Never mind about the unfilled buttons. We will talk on it later in 8.1.3.2
90100.1.02 Instruction Manual TR-MARK III
chapter '8.2.4 New Measurement'.
Turn Ratio and Voltage Ratio
Page 24 of 70