Clear All Memory; Hdd Format - Dell 2145cn Service Manual

CLEAR ALL MEMORY

The function resets the system to factory default settings.
This function is used to reset the system to the initial value when the product is functioning abnormally. All the
values are returned to the default values, and all the information, which was set by the user, will be erased.
< Method >
1. Select the [Data Setup - Clear All Mem.] at the TECH MODE.
2. Push the ENTER button.
3. Select you country.
4. Push the ENTER button then it will clear all memory.
NOTICE : Always perform a memory clear after replacing the main board. Otherwise, the system may not
operate properly.
Margin
The function is to set the Top Margin or Left margin of all image.
Fine Edge
The function is to enhance the printing resolution by adjusting Dot Size for Font Size.
Darken Text
The function is to make all text printed darken.
Toner Low Level
The function is to set up the time to inform toner low status. This function can provide user convenience for
replacing the toner cartridge.
New Sensor
The function is to adjust Top Margin for New board whose feeder sensor's position was changed.
B2B Mode
The function is to customize special feature.

HDD Format

The function is to format HDD.
Service tag
The function is to maintain service number.
Alignment and Troubleshooting
4-41