Dell 2145cn Service Manual page 70

6. To replace the tray, lower the rear edge, align it
with the slot, and slide it into the machine.
4.1.3.2 In the multi-purpose tray
When you print using the Multi-purpose Tray and the machine detects that there is either no paper or the
paper has been improperly loaded, follow the next steps to release the jammed paper.
1. Check if the paper is stuck in the feeding area,
and if so, pull it out gently and slowly.
If you cannot find the jammed paper, or if there is
any resistance removing the paper, stop pulling
and go to step 2.
2. Close the multi-purpose tray.
Alignment and Troubleshooting
7. Open the front cover and close it. The machine
will resume printing.
3. Pull the tray out.
4. Open the inner cover while you are pushing the
lever with two hands.
4-6