Checking Replaceables; Replacing The Dadf Rubber Pad - Dell 2145cn Service Manual

Checking replaceables

If you experience frequent paper jams or printing problems, check the number of pages the machine has
printed or scanned. Replace the corresponding parts, if necessary.
1. Press Menu until System Setup appears on the bottom line of the display and press OK.
2. Press the left/right arrow until Maintenance appears and press OK.
3. Press the left/right arrow until Supplies Life appears and press OK.
4. Press the left/right arrow until the item you want appears and press OK.
• Supplies Info: Prints the supply information page.
• Total: Displays the total number of pages printed.
• ADF Scan: Displays the number of pages scanned using the ADF.
• Platen S can: Displays the number of pages scanned using the scanner glass.
• Transfer Belt, Fuser, Tray1 Roller, Tray2 Roller, MP Tray Roller: displays the number of pages printed
for each item.
5. If you selected to print a supply information page, press OK to confirm.
6. Press Stop/Clear to return to ready mode.

Replacing the DADF rubber pad

You will need to replace the DADF rubber pad when there seems to be a consistent problem with paper
pickup or when its specified yield is reached.
1. Open the DADF cover.
2. Remove the DADF rubber pad from the DADF,
as shown.
Alignment and Troubleshooting
1 DADF rubber pad
4-29
3. Insert a new DADF rubber pad into place.
4. Close the DADF cover.