Dell 2145cn Service Manual page 108

Message
Data Write Fail Storing to the USB memory failed.
Check USB Mem.
Document Jam The loaded original has jammed in the DADF.
Door Open/Check The front cover is not securely latched.
Transfer Belt
Duplex Jam 0 Paper has jammed during duplex printing.
Check Inside This is applicable only to machines with this
feature.
Duplex Jam 1 Paper has jammed during duplex printing.
Open/Close Door This is applicable only to machines with this
feature.
Enter Again You entered an unavailable item.
File Access Login to the network server was successful.
Denied However, access to the file on the network
server was denied.
File Format The selected file format is not supported.
Not Supported
File Name Exist The file name you have entered already
exists.
File Name The file names you can use are from doc001
Over Limit to doc999.
However, all file names are used already.
Fuser Fan There is a problem in the cooling fan of the
Locked machine.
Global Address When the device is unable to locate the given
Not Found address of the Global server.
Global Query This is an error message and displays when
Size Exceeded the global query size has been exceeded.
Global Server When there is a authentication fail while
Auth Failed connecting to the global server this message
displays.
Global Server When no global server is configured, this
Not Configured message displays.
Global Server When the device is unable to find the Global
Not Found server.
Global Server Network Information Center (NIC) failed to
Query Timeout get the proper response from the LDAP
server within specified time.
Alignment and Troubleshooting
Meaning
4-44
Suggested Solution
Check the available USB memory space.
Clear the jam.
Close the cover until it locks into place.
Clear the jam.
Clear the jam.
Enter the correct item again.
Change the server settings.
Use the correct file format.
Enter a different file name.
Delete unnecessary files.
Open and then close the front cover.
Check the search ID.
There are too many search results. Refine
your search by entering more letters.
Contact a LDAP server administrator.
Check the authentication account and
password.
Check the LDAP server configuration
settings.
Check the LDAP server address, The LDAP
server address is incorrect, or the server
has failed.
Check the LDAP server setting, LDAP server
setting is incorrect.