Removing An Lc-Lc Fibre Channel Cable; Inserting An Lc-Lc Fibre Channel Cable Into An Sfp Module - IBM TotalStorage DS4000 EXP100 Installation, User's, And Maintenance Manual

Figure 33. Removing fiber-optic cable protective caps
4. Carefully insert this end of the LC-LC cable into an SFP module that is installed
Figure 34. Inserting an LC-LC Fibre Channel cable into an SFP module
5. Remove the two protective caps from the other end of the LC-LC cable. Save
6. Connect this end of the LC-LC cable to one of the following devices:

Removing an LC-LC Fibre Channel cable

Complete the following steps to remove an LC-LC Fibre Channel cable:
52
IBM TotalStorage DS4000 EXP100 Storage Expansion Enclosure: Installation, User's and Maintenance Guide
Fibre-optic
cable
in the EXP100. The cable connector is keyed to ensure it is inserted into the
SFP module correctly. Holding the connector, push in the cable until it clicks into
place, as shown in Figure 34.
the protective caps for future use.
v An SFP module that is installed in a separate EXP100
v An SFP module that is installed in a DS4000 storage subsystem like a
DS4300 or DS4500.
Protective cap