Using Lc-Sc Fibre Channel Cable Adapters; Removing The Lc-Lc Fibre Channel Cable - IBM TotalStorage DS4000 EXP700 Installation, User's, And Maintenance Manual

Figure 29. Removing the LC-LC fibre channel cable
3. Replace the protective caps on the cable ends.
4. Replace the protective cap on the SFP module.

Using LC-SC fibre channel cable adapters

The LC-SC fibre channel cable adapter is a fiber-optic cable that is used to connect
an LC connector into one of the following devices that require SC connectors:
v IBM FAStT200 Storage Server
v IBM FAStT EXP500 Storage Expansion Enclosure
v IBM FAStT500 RAID Controller Enclosure Unit
Note: The LC-SC fibre channel cable adapter is required only in some
For more information about connecting to these devices, see the documentation
that comes with the LC-SC fibre channel cable adapter.
Figure 30. LC-SC fibre channel cable adapter
The following sections provide the procedures for properly connecting and removing
an LC-SC fibre channel cable.
configurations with the DS4000 EXP700. No configurations that include the
DS4000 EXP710 will require the use of an LC-SC fibre channel cable
adapter.
LC connector
Chapter 2. Installing and cabling the storage expansion enclosure
SC connector
39