Aligning Ink Cartridges - BT MultiJet 3000 Manual

Aligning ink cartridges

If your print quality is not satisfactory, you may need to
align your ink cartridges or clean the nozzles.
To a l ig n t he car tridges
At the BT MultiJet 3000 :
Load plain paper in the printer.
Either, at the BT MultiJet 3000:
Print an alignment page using the front control panel:
Scan
Press and hold the S c a n button for 3 seconds.
The display will show CARTRIDGE ALIGN?
Press the S t a r t / Ye s button. The alignment page
is printed.
Yes
Or, from your PC
Open the Control Program via S t a r t , S e t t i n g s ,
right click MJ3 printer icon and select
P r i n t e r s ,
MJ 3 C o n t r o l P r o g r a m
Click on C a r t r i d g e s t a b
Select A l i g n C a r t r i d ge s .
The alignment page is printed.
I m p o r t a n t
If you have installed a new cartridge an alignment
page is printed automatically. It is important you
follow this procedure for the best quality printing.
The test page has several alignment patterns, depending
on the cartridge combination installed.
Under each group – A B C D - on the page, select the
alignment number for the pattern that comes closest to
forming a straight line. You can now set these numbers
for your machine.
Ei ther, at your BT M ul t i Jet 3000:
The display shows the first group letter A.
Scan
Press the Adj ust buttons to select the alignment
number you want for group A.
Scan
Press S TA RT / Y E S to display B.
Use the A djus t buttons to select the alignment
number for group B. Repeat for groups C and D.
Yes
The cartridges are now aligned.