Table of Contents
Advertisement
Printing
Setting up and using your printer
Plea s e n o t e
The exact steps for printing may vary according to
the type of application software you have. Refer to
your software application user manual for detailed
steps on printing.
W hen yo u a r e r ead y to pr i n t a doc ume nt
f r o m yo u r PC s cr ee n:
Check you have the right paper in the input tray and
replace if necessary. See Paper/Envelope options, and
Choosing settings for paper/envelopes.
Click on the F i l e menu.
Select P r i n t .
Click O K to start printing.
O r
Click on the Printer icon
Plea s e n o t e
If you are going to print colour photographs,
you can improve the print quality by replacing
the black cartridge with a special Photo cartridge.
Using the Printer Control Program
The Control Program lets you monitor the job status,
install, align or clean cartridges, or change other options.
To o p e n th e C o n tr o l P r o g r a m
The control program opens automatically when you print
a document. You can also open it manually.
At your PC
•
Click on S t a r t
•
Select Se tt in gs
•
Select P r i n t e r s and a new screen opens.
•
Right click on the M J 3 printer icon and click on
MJ 3 Con tr o l Pr o g r a m .
Fo u r t a b s a r e av a ila b l e :
Status:
Displays the current ink levels in the cartridges
Print Test Page
Options:
Run Minimised – stops the Control Program from
appearing each time a job is sent to the printer
Close Status at End of Job
Enable Sound Effects
Disable Printer to PC Communications
Enable Buffer Mode
Cartridges:
Install/Change Cartridge – provides
installation instructions
Clean Print Nozzles
Align Cartridges
About:
Software version
Advertisement
Table of Contents
