Table of Contents
Advertisement
Pa p er / E nvelope opti o ns
Load up to
1 0 e nve l o p e s
10 g r ee t i n g c a r ds ,
i n d ex c a r d s , p o s t -
c a r d s , o r p h o t o c a r d s
25 s he e t s o f p h o t o
pa pe r o r p h o t o c ar ds
20 s he e t s o f
ba n n er p a p e r
Note: Make sure you select
Banner or A4 Banner paper
size in the Printer Properties
1 0 t r a n s p a r e n c i e s
10 0 s he e t s o f
c u s t o m - s i ze d p a p e r
2 5 i r o n - o n t r a n s fe r s
Make sure
• The print side is facing you and the paper guide is
adjusted against theside of the envelopes.
• The stamp location is in the upper left corner.
• The envelopes are loaded ve r t i c a l l y against the righ side of the rear input tray.
• The print side is facing you and the paper guide is adjusted against the side of the cards.
• The cards are loaded ve r t i c a l l y against the right side of the sheet feeder.
• The glossy or coated side is facing you.
• The paper guide is against the side of the paper.
• Place the banner paper behind the printer.
Then bring the unattached edge of the first page over the
printer and into the sheet feeder.
• The paper guide is against the side of the paper.
• The rough side of the transparency is facing you.
• The paper guide is against the edge of the transparencies.
• The print side is facing you and the paper guide is against the side of the paper.
• Your paper size fits within these dimensions:
- Width: 3.0 in. to 8.5 in. (76 mm to 215.9 mm)
- Length: 5.0 in. to 17.0 in. (127 mm to 432 mm)
• You load the iron-on transfers following the instructions on the package.
• The paper guide is against the side of the iron-on transfers
• Your BT MultiJet 3000 automatically prints a mirror image.
Advertisement
Table of Contents
