Table of Contents
Advertisement
1 2.
•
If you are not connected to a switchboard, click N ex t .
Or
•
If your system is connected to a switchboard and you
have to dial an access code to get an outside line
(usually 9 ) enter it in the Preamble box.
If you need to dial a code number to charge the cost of
your fax messages to a different network service
provider, enter the code number here.
If you need a pause anywhere in the dialling prefix enter
'&' to give a pause of about one second.
•
Click N ex t .
Plea s e n o t e
You can enter a forward slash '/' at the start of a fax
number to ignore any prefix code you have entered.
1 3 .
•
Click Ye s to automatically receive faxes directly into
your computer.
P le a se n ot e
To receive faxes, your PC must be switched on with
Unimessage Pro running and it must be connected
to a telephone line.
You can use Routing Rules to automatically print
faxes on reception.
Advertisement
Table of Contents
