BT MultiJet 3000 Manual page 44

To cha nge t he col our
The display shows the current setting, black ( B L K ) or
colour ( C L R ) .
Press C o l o u r / B la ck to display the option
Colour/Black Colour/Black
you want.
To m a ke c opies
You can make up to 99 copies.
Place the document to be copied on the scanner.
If you want to make more than one copy, press
N um b e r o f C o p ie s
Adjust
you want. Hold down the button to change the
number of copies in steps of 5.
Press S t a r t . The page is scanned. You hear a
beep when scanning is finished.
Yes
You can scan another page, while your BT MultiJet 3000
is printing.
To s to p co py ing
Press S t o p . Display shows C a n c e l A l l Jo b s ?
Press Ye s . The display will show Canceling
No
Jobs and copying is stopped and any paper
being printed is ejected.
Ple as e no t e
If you have not scanned or copied any documents
within the previous 30 minutes, there is a delay of
about 50 seconds while the scanner warms up.
to set the number of copies
To s et the pa per si ze
Your BT MultiJet 3000 is pre-set to scan A4 size for
copies. You can set it to copy different sizes of paper -
A4, B5 or LTR for Letter size.
P lease N ote
Setting the paper size determines the size of the
screen that is scanned, it does not control the
paper output.
Paper Size
Press Pa p e r / S i ze until the display shows the
option you want A 4 , B 5 or LT R .
Press S t a r t or select another option.
Yes
Press S t o p to return to standby and your original
paper size setting.
No
Sl eep mode
If your BT MultiJet 3000 is not used for 30 minutes it
will enter and display S L E E P M O D E . The printer will
continue to work but there will be a delay of
approximately 50 seconds to warm up before you
can scan or copy.