Installing Or Replacing Print Cartridges - BT MultiJet 3000 Manual

Keeping your BT MultiJet 3000 clean
C l ea nin g t he s canner g l as s
Over time, the scanner glass may become dirty. To
ensure the best quality scans, wipe the scanner glass
with a soft clean cloth to remove dust or other debris.
C l ea nin g
Always use a dry cloth to clean the control panel and the
main body of the machine.
C a u t i on
Never put water or spray glass cleaner directly on
the scanner glass. If you need to remove a stubborn
smudge, slightly dampen your cloth with water or
glass cleaner first, then wipe.
P rint q u alit y
If your print quality is not satisfactory, you may need to
align your print cartridges or clean the print nozzles. A
Test page can be printed from Print Properties or the
Control Program.

Installing or replacing print cartridges

Re p l aceme nt i nk car tri d ges
Black = MJ3000MS
Colour = MJ3000CS
Photo = MJ3000PS
The ink cartridges are available from 0800 590009
P le a se n ot e
For the best possible photo quality, print with
a photo and colour cartridge combination in
your printer.
Make sure the Power is On
Lower the front cover. The ink cartridge carrier moves to
the centre loading position unless the printer is busy.
Remove the old print cartridge.
If you are installing a new cartridge, remove the sticker
and the tape from the bottom of the print cartridge.