BT MultiJet 3000 Manual page 29

25. Click Ye s if you want to be able to send and receive
faxes (if you already have fax set up from your
original installation you must still select Ye s here).
Click N ex t .
26. Enter any system device name you want (if you
previously had a device configured use a name that is
noticeably different to the previous one, e.g. " N E W ".).
Click N ex t .
27. If this screen is shown, choose C l a s s 1 or Cl a ss 2
(you need to check what class of fax modem you
have, normally Class 1). Click N ex t .
28. Select To n e . Click N ex t .