Garbage Incinerator - YOKOGAWA ZR22G Technical Information

<Toc> <Ind>
4.5

Garbage Incinerator

This is a facility to handle by incineration the combustible waste generally contained in municipal
garbage.
The exhaust gas of the incinerator outlet contains large quantities of dust and corrosive gasses,
and a large water vapor component.
Yokogawa should be consulted concerning the installation of the unit.
Incinerator outlet
(gas cooler outlet)
Sewage Sludge
Measured Feed
Extraction Blower
Control Oil Gun
Heavy Oil
Garbage incinerator
Incinerator outlet: 700 to 750°C
Exhaust gas temperature: 700 to 750°C
Dust: 20 to 30 g/Nm
Exhaust gas components: SOx Several hundred ppm
All Rights Reserved. Copyright © 2004, Yokogawa Electric Corporation
Sample point
Scrubber outlet
(or stack)
3
HCl 100ppm
System type
H2, H3
Note: depending on the
conditions at the sample
point, a sampling type
system may be required.
L2, L3
Fluidized Bed Incinerator Plant
Air Preheater
Cyclone
Hot Blast Furnace
Scrubber outlet
4. Application
Detector
D5 Combustion monitoring
D1, (D3) Combustion monitoring
Electric
Denitration
Precipitator
Tower
Auxiliary Blower
Pressurizing Blower
Exhaust gas temperature: 80 to 120°C
3
Dust: 0.1 g/Nm maximum
TI 11M12A01-01E
4-14
Objective
T0414.EPS
Scrubber
Deconsolidator
Dust
F0414.EPS
May 31, 2004-00