Table of Contents
Advertisement
Available languages
Available languages
Important Information
Proper Use
Important: Auerswald products are not designed, manufactured, or intended for use or
resale, in environments that require fail-safe performance, such as in the operation of
life-support systems and/or nuclear facilities. Our products may only be used for these
purposes with prior written permission from Auerswald in each individual case.
Important: Improper use may cause, for example, functional restrictions or interference,
the destruction of the device or, in a worst-case scenario, personal injury.
• If you are still uncertain about how to use the product properly after reading the
chapter below, please contact your specialised dealer.
• Read the instructions for the device and keep them for future reference.
The devices COMfortel 1600 and 2600 are system telephones.These system telephones are
intended for use in closed, dry rooms. System telephones are intended exclusively for con-
necting to an internal S
• COMpact 3000 analogue/ISDN/VoIP (as of firmware version 4.0L)
• COMpact 2206 USB (as of firmware version 2.4B)
• COMpact 4410 USB (as of firmware version 2.4B)
• COMpact 4000
• COMpact 5000/R
• COMpact 5010 VoIP (as of firmware version 4.2A)
• COMpact 5020 VoIP (as of firmware version 4.2A)
• COMmander 6000/R/RX (as of firmware version 6.0E)
• COMmander Basic.2/19" (as of firmware version 4.2A)
• COMmander Business/19" (as of firmware version 4.2A)
Important: Connecting to a PBX from another manufacturer or to the external S
nection of a network provider is not intended.
34
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016
or U
port of the following PBXs from Auerswald:
0
P0
con-
0
Advertisement
Table of Contents
