Mounting The Device With Mounting Brackets - Siemens SIMATIC IPC477E Operating Instructions Manual

Mounting and connecting the device
3.2 Installing the built-in unit
3.2.4

Mounting the device with mounting brackets

If there are strict requirements for the front seal, it may be necessary to fasten the device
with mounting brackets in a cabinet. You can secure each device with 6 mounting brackets.
The mounting brackets are available as accessories.
Requirement
● All packaging components and protective films have been removed from the device.
● The accessory mounting brackets are available.
● 2.5 mm hexagonal spanner
Procedure
Note
If the mounting seal is damaged or protrudes over the device, the degree of protection is not
guaranteed.
1.
38
Working from the front, insert the device
into the mounting cut-out.
Operating Instructions, 12/2016, A5E37455003-AB
SIMATIC IPC477E