3.2.3
Mounting the device with mounting brackets
If there are strict requirements for the front seal, it may be necessary to fasten the device
with mounting brackets in a cabinet. You can secure each device with 6 mounting brackets.
The mounting brackets are available as accessories. You can find ordering information in the
section Accessories (Page 20).
Requirement
● All packaging components and protective films have been removed from the device.
● The accessory mounting brackets are available.
● 2.5 mm hexagonal spanner
Procedure
Note
If the mounting seal is damaged or protrudes over the device, the degree of protection is not
guaranteed.
1.
SIMATIC IPC277E
Operating Instructions, 11/2019, A5E35783335-AE
Working from the front, insert the device
into the mounting cut-out.
Installing and connecting the device
3.2 Installing the device
43