Radio Channels Overview; Network Status Overview - EMS Firecell Programming Manual

6.0 RADIO CHANNELS OVERVIEW

The Radio Channels Menu allows the user to program the frequency of the Radio Network. Two of
32 radio channels can be programmed between frequency of 458.5125 and 458.9375. As default
the radio channels will be automatically programmed when the Set Site ID is programmed.
1. Currently Used – Allows the user to view the frequencies the network is programmed with.
2. Default Channels – Allows the user to default the channels, which is dependant on what
the Site Node 1 ID is set to.
3.
Manual Select – Allows the user to manually select operational frequencies, there are 32
selectable channels
4. Channel Scan – Allows the user to scan the network and allocate the best frequency for
the system to use. NOTE: THIS CAN ONLY BE USED ONCE THE SYSTEM IS RUNNING.

7.0 NETWORK STATUS OVERVIEW

The Network Status Menu allows the user to view the status of other Radio Network
Communicators across the system in a list format.
All 8 Radio Network Communicators (nodes) will be listed even if not in use.
EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England
Technical Helpline Tel: +44 (0) 1227 369570
FireCell Radio Network Communicator Programming Manual (Issue 2)
Radio Channels
Currently Used
Default Channels
.
Manual Select
Channel Scan
Network Status
Node 1 Healthy
Node 2 Healthy
Node 3 Offline
Node 4 Fault 
Node 5 None
Node 6 None
Node 7 None
Node 8 None
Email: enquiries@emsgroup.co.uk Website:www.emsgroup.co.uk
MK137 Page 8