Removing A Radio Network Communicator; Adding A Radio Network Communicator - EMS Firecell Programming Manual

13.0 REMOVING A RADIO NETWORK COMMUNICATOR

From the Front Screen:
Press the Enter Key to access the menus:
Press the Down Key until to show:
Press the Enter Key to show:
Press the Down Key until 'Remove Node' is shown:
Press the Enter Key to show:
Using the Up and Down key scroll through
until the desired Node is displayed:
Press the Enter Key:
Press the Down Key so
Press the Enter Key and the screen will display:
Press the Back Key until the front screen is shown:

14.0 ADDING A RADIO NETWORK COMMUNICATOR

From the Front Screen of the node that you wish to add:
Press the Enter Key to access the menus:
Press the Down Key until to show:
Press the Enter Key to show:
Press the Down Key until 'Remove Node' is shown:
Press the Enter Key to show:
Press the Down Key so
Press the Enter Key to show:
Followed by:
Updating when complete to:
Press the Back Key until the front screen is shown. e.g.:
EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England
Technical Helpline Tel: +44 (0) 1227 369570
FireCell Radio Network Communicator Programming Manual (Issue 2)
Y is shown:
Y is shown:
Email:
Node 01 TOT08
Node Status
Node Setup
Set Node Number
Remove Node
Node 1 Healthy
Node 3 Healthy
Remove Node N?
Remove Node Y?
Removed
Node 01 TOT07
Not Configured
Node Status
Node Setup
Set Node Number
Add Node
Join Network N?
Join Network Y?
Searching...
Accepting...
Node Added
Node 02 TOT02
enquiries@emsgroup.co.uk
MK137
Website:www.emsgroup.co.uk
Page 13