Introduction; Menu Structure Screen Shots And Explanations; Front Screen Overview - EMS Firecell Programming Manual

1.0 INTRODUCTION

This document explains the Radio Network Communicator Menus and Basic Operation. This
document also details steps with screens shots on how the system is programmed. A Radio
Network will be supplied un-programmed unless otherwise specified.

2.0 MENU STRUCTURE SCREEN SHOTS AND EXPLANATIONS

2.1 Front Screen Overview

The Radio Network Communicator will show 1 of 5 front screens once powered.
Screen 1
Un-programmed Node front screen:
Screen 2
Programmed but un-configured Node front screen:
Screen 3
Programmed and configured Node 1 front screen with no faults present:
Programmed and configured Node 2 front screen with no faults present:
Screen 4
Programmed and configured Node 1 with no radio comms front screen:
Programmed and configured Node 2 with no radio comms front screen:
Screen 5
Programmed and configured Node 1 with fault condition front screen:
Programmed and configured Node 2 with fault condition front screen:
EMS Group Head Office, Technology House, Sea Street, Herne Bay, Kent CT6 8JZ, England
Technical Helpline Tel: +44 (0) 1227 369570
FireCell Radio Network Communicator Programming Manual (Issue 2)
Un-programmed
Not Configured
Node 01 TOT08
Node 02 TOT08
Node 01 Offline
Node 02 Offline
Node 01 Fault 
Node 02 Fault 
Email: enquiries@emsgroup.co.uk
MK137
Website:www.emsgroup.co.uk
Page 3