Product Introduction; General Characteristics; Special Features - Ablerex ARES RT-1K User Manual

2. Product Introduction

2.1 General Characteristics

1. True on-line technology continuously supplies your critical device with
stable, regulated, transient-free, pure-sine-wave AC power.
2. High-efficiency PWM sine-wave topology yields excellent overall
performance.
3. The high crest factor of the inverter handles all high in-rush current
loads without the need to upgrade the power rating.
4. User-friendly plug-and-play design allows hassle-free installation.
5. Built-in maintenance-free, sealed batteries minimize the need for after-
sales service.
6. To protect the unit from overloading, the UPS will automatically switch
to bypass mode in 30 seconds if loading is at 105% of rated capacity. It
will automatically switch back to inverter mode once the overload
condition ceases.
7. Should the output become short-circuited the UPS puts the system in
stand-by mode, provides visible and audible alarms, and cuts the output
supply automatically until the short circuit situation is resolved manually.
4

2.2 Special Features

1. Our High Frequency Transformer-less technology and tower-convertible
enclosure enables the UPS to be integrated into even the most difficult
environments with space constraints.
2. This UPS is equipped with fully digital control logic for greater functionality
and enhanced power protection. Digital signal processing (DSP) also
provides the UPS with powerful communication capability, which
simplifies remote control and monitoring.
3. Our wide input voltage tolerance of 110-300 V allows under-voltage or over-
voltage correction without unnecessary battery drain and helps extend
battery life.
4. Our DC-start function ensures the start-up of the UPS even during power
outages.
5. Our smart battery management system extends the batteries' life span.
6. Our Active Power Factor Correction control function constantly maintains
the UPS input power factor at > 0.98 for superb energy efficiency.
7. Our Selectable Bypass input voltage tolerance (sensitivity low/high)
prevents under- or over-voltage being supplied to the loads in Bypass
mode. The selectable voltage ranges are (i) Bypass Sensitivity Low: many
selectable output voltages
selectable output voltages
setting is 230 V the Bypass Sensitivity Low range is 230 V ±15%, i.e.,
195.5-264.5 VAC.
8. The UPS provides numerous configurable output voltages to match
various system voltages.
9. The UPS is designed to comply with various stringent international standards
for electromagnetic interference compatibility (EMC).
± 15% and (ii) Bypass Sensitivity High: many
10%. For example, if the output voltage
±
5