Power On/Off; Powering On; Powering Off - Fujitsu IP-900E Hardware User's Manual

Chapter 3 Operation Instructions
3.1
3.1
This section explains how to power on/off the IP-900E/IP-900D/IP-900IID.
3.1.1 Turn on IP-900E/D
When the power button on the front panel is set to the [ | ] position, the PWR LED turns on.
When IP-900E/IP-900D/IP-900IID completes preparations for operation, the RDY LED turns on.
Power button
This indicates the on switch, which is used to supply power to the IP-900E/D.
｜
This indicates the off switch, which is used to disconnect power from the IP-900E/D.
○
3.1.2 Turn off IP-900E/D
When the power button on the front panel is set to the [O] position, this equipment is turned off
and the PWR LED turns off.
IP-900E/IP-900D/IP-900IID
Turn ON/OFF IP-900E/D
Power(PWR) LED
100-240V
PWR ALM
RDY
FG
Status(RDY) LED
10/100BASE RS-232C
E
100M
OPT
LINK
IN
/ACT
DWN
MNT
46
L R
ANALOG AUDIO IN