Fujitsu IP-900E Hardware User's Manual page 52

Chapter 2 Installation and Connection
Country Agency
Austria OVE
Belgium CEBEC
Denmark DEMKO
Finland FEI
France UTE
Germany VDE
Possibility of electric shock, fire, and damage to this equipment
Always observe the precautions given below.
This indicates a hazardous situation that could lead to electric shock, fire, or
damage to this equipment.
Always connect the power cord to a power receptacle for the standard
two-prong plug with ground.
Use a power receptacle with a capacity of 1A or more. When using a power
extension cable, be sure that the total power consumption of all devices
connected to the cable does not exceed the rated capacity of the cable. If the
power receptacle capacity is low, or power consumption exceeds the rated value,
the power cord or power wiring may overheat and start a fire.
Possibility of damage to this equipment
Do not turn on this equipment until connection of peripheral devices is
completed. Otherwise, this equipment may be damaged.
100-240 VAC
Using a power cord with the standard two-prong plug with ground, connect
IP-900E/IP-900D/IP-900IID to 100-240 VAC outlet.
Provide a power receptacle for the standard two-prong plug with ground.
IP-900E/IP-900D/IP-900IID
CERTIFICATION MARKING
Certification Mark
V
D E
Country Agency
Italy IMQ
Norway NEMKO
Spain AEE
Sweden SEMKO
Switzerland SEV
38
Certification Mark