Fujitsu IP-900E Hardware User's Manual page 22

Chapter 1 Preparations
- IP-900D/IP-900IID (Figures is described by using IP-900IID as a sample.)
100-240V
Part names
No. Name
Power inlet connector
(1)
(INPUT 100-240VAC)
Power button
(2)
Power LED (PWR)
(3)
Status LED
(4)
(RDY)
Alarm LED
(5)
(ALM)
Decoder LED
(6)
(DEC)
LAN port
(7)
(10/100BASE)
Speed LED
(8)
(100M)
Status LED
(9)
(LINK/ACT)
RS-232C port
(10)
(RS-232C)
Audio output
(11)
(ANALOG AUDIO OUT)
(L), (R)
FG terminal
(12)
)
(FG
IP-900E/IP-900D/IP-900IID
Figure Front panel
(1)
(2)
(3) (4) (5)
PWR ALM
RDY DEC
FG
MNT
(12) (13)
Figure Rear panel
AUX
(17) (18)
Can be connected to a 100-240VAC commercial power supply by using power
card with a standard two-prong plug with ground.
See Section 2.2.2, "Connection to a Power Source," for an explanation on using
this connector. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Turns this equipment on and off.
Turns on when this equipment is powered on.
Turn on when IP-900D/IP-900IID power is on. For more information, see
Table 5.3, "Details of LED Indications," in Section 5.2.
Turns on when IP-900D
information, see Table 5.3, "Details of LED Indications," in Section 5.2.
Turn on when IP-900D/IP-900IID is decoding then stream. for more
information, see Table 5.3, "Details of LED Indications," in Section 5.2.
Ethernet 10BASE-T/100BASE-TX communication port. See Section 2.4,
"Connection to a Network," for an explanation on using this port. See Section
4.2, "Cable and Connector Details," for cable connection information.
Indicates the status of LAN port. For more information, see Table 5.3, "Details
of LED Indications," in Section 5.2.
Indicates the speed of LAN port. For more information, see Table 5.3, "Details
of LED Indications," in Section 5.2.
RS-232C data communication port.
See Section 2.5, "Connection to an RS-232C Device," for an explanation on
using this pin. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Unbalanced audio output terminal.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Use for an FG connection to this equipment.
See Section 2.2.1, "Connection to ground," for an explanation on using this
terminal.
(7) (8)
(9) (10)
(6)
10/100BASE RS-232C
D
100M
LINK
/ACT
(14) (15)
(3) (4) (5) (6) (8)
(9)
D
PWR ALM LINK /ACT
RDY DEC 100M
Description
/IP-900IID
operation is abnormal. For more
8
(11)
L R
ANALOG AUDIO OUT
(16)