Fujitsu IP-900E Hardware User's Manual page 9

Work type
Installation Possibility of electric shock and fire
Do not install this equipment in the following places because using it there may cause a
fire or electric shock:
• Extremely dusty or dirty place
• Wet or humid location
• Hot location, such as a place where this equipment is exposed to direct sunlight or
is near heating equipment
• Near products (e.g., speakers) that generate a strong magnetic field
• Location where the temperature is too hot or cold
• In an environment with sharp temperature fluctuations
• Area with poor ventilation
• Near a fire
Possibility of electric shock, fire, and damage to this equipment
Always observe the precautions given below.
This indicates a hazardous situation that could lead to electric shock, fire and damage to
this equipment.
• Always connect the power plug to a power receptacle for a standard two-prong plug
with ground.
• Connect this equipment to a power receptacle with a capacity of 1 A or more.
When using a power extension cable, be sure that the total current consumption of
all
If a power receptacle with a low capacity or capacity below the rated value is used,
the power receptacle, extension cable or power wiring may overheat and start a fire.
devices connected to the cable does not exceed the rated capacity of the cable.
vii
Warning
IP-900E/IP-900D/IP-900IID