3.3.7
Securing the lines
The strain relief (see "scope of delivery (Page 29)") provided is used to prevent accidental
loosening of the interface cables from the device.
Requirements
• I/O devices are connected to the respective interfaces.
• Cable ties (not included in the scope of delivery)
Procedure
1. Pass the cable tie around the strain relief
bar and secure the cables as shown.
2. Cut off the protruding ends of the cable
ties.
SIMATIC IPC PX-39A
Operating Instructions, 08/2022, A5E51699601-AA
Installing and connecting the device
3.3 Connecting the device
51