Connecting Profinet Strain Relief - Siemens SIMATIC PC 847B Operating Instructions Manual

6.4

Connecting PROFINET strain relief

The PROFINET strain relief provided in the package is used to prevent accidental loosening
of the cable from the device. A cable tie (not included in the package) is needed for each
interface.
To fix the PROFINET strain relief, you will need a TORX T10 screwdriver.
Steps for connecting the PROFINET strain relief
1
2
SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01
Remove the PROFINET interface plate.
Attach the PROFINET strain relief.
6.4 Connecting PROFINET strain relief
Connecting
35