Activating The Wi-Fi Mode; Connecting To The Wireless Network - Yealink CP920 User Manual

Activating the Wi-Fi Mode

To activate the Wi-Fi mode via phone user interface:
Tap Menu ->Settings -> Basic Settings->Wi-Fi.
1.
Tap the Switch soft key to select On from the Wi-Fi field.
2.
Tap the Save soft key.
3.
The IP phone scans the available wireless network in your area.

Connecting to the Wireless Network

Three ways to connect CP920 IP phone to the wireless network:
Manually connect to an available wireless network

Wi-Fi Protected Setup (WPS)

Manually add a wireless network

Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
Tap Menu ->Settings -> Basic Settings ->Wi-Fi.
1.
Tap the Switch soft key to select On from the Wi-Fi field.
2.
The IP phone scans the available wireless network in your area.
Tap or
3.
networks), and then tap the Enter soft key.
If there is no available wireless network, tap the Scan soft key to search for the wireless
network again.
Tap or
4.
Tap the Connect soft key.
5.
to highlight X available networks (X is the numbers of available
to select the desired wireless network.
Getting Started
19